Air Carrier Certification
Welcome

Manuals and Programs

The manuals describe how the air carrier will operate. The FAA reviews them to determine whether the proposed operation complies with the regulations and can be performed safely.

Major Work Products

Manual / Program Purpose
General Operations Manual Defines operational control, company organization, flight operations, crewmember duties, records, procedures, and operating policies.
General Maintenance Manual Defines the maintenance organization, maintenance program, inspection system, records, and continuing airworthiness procedures. A separate GMM is required for aircraft type-certificated for 10 or more passenger seats.
Company Training Manual Defines the training system, curriculum structure, qualification standards, checking, recurrent training, records, and instructor/check-pilot functions.
Aircraft-Specific Training Provides the ground, flight, systems, limitations, procedures, emergency, and qualification training for each aircraft type.
Minimum Equipment List Allows specified inoperative equipment to be deferred under approved conditions, procedures, limitations, and repair intervals.
Hazardous Materials Program Defines whether the operator will carry or will-not-carry hazardous materials and establishes the required training and procedures.
Safety Management System Defines safety policy, safety risk management, safety assurance, safety promotion, responsibilities, records, and performance monitoring.
International Flight Operations Manual Supports international areas of operation, navigation, communications, oceanic procedures, flight planning, customs, and special authorizations, as applicable.
Flight Attendant Manual Required when the operation requires flight attendants; defines duties, training, emergency procedures, passenger handling, and cabin-safety responsibilities.

Training Programs

Basic indoctrination and company procedures.

Emergency and Crew Resource Management training.

Initial aircraft ground and flight training.

Recurrent, requalification, transition, differences, and upgrade training, as applicable.

Hazardous materials training.

Flight attendant training when required.

Manuals, DCTs, and Compliance

Step Purpose
1. RegulationIdentify the applicable regulatory and FAA guidance requirement.
2. ManualDescribe how the company complies.
3. DCT ResponsePoint the FAA inspector to the exact manual and location.
4. TrainingTeach personnel how to perform the approved procedure.
5. RecordsDocument that the required action, training, inspection, or qualification was completed.

Operations Software

The manuals define the procedures. Operations software turns those procedures into the forms, records, alerts, qualification tracking, maintenance controls, and other tools used to operate the company.

Scheduling and dispatch records.

Pilot qualification and training records.

Aircraft conformity and maintenance tracking.

Safety reporting and SMS records.

Controlled forms and required operational records.

Executive View

Question Why It Matters
Are the manuals complete?Required manuals and training programs must be submitted for FAA review as part of the formal application.
Do the manuals match the aircraft and operation?Generic documents are not enough; the procedures must support the actual aircraft, personnel, authorizations, and areas of operation.
Can employees use the procedures?FAA approval is only the beginning. Personnel must be trained to perform the procedures correctly.
Can compliance be demonstrated?The company must produce records showing that required training, maintenance, inspections, qualifications, and operational controls occurred.

Create vs Buy

Create a New Certificate Acquire an Existing Part 135 Charter Company

Develop the manual system.

Build the training programs.

Complete the DCT and compliance work.

Create the forms, records, and operating systems.

Begin with an established FAA-approved or accepted manual system.

Modify the manuals for the buyer's aircraft and operation.

Train and qualify the buyer's personnel.

Use the existing compliance and operations software as the foundation.

FAA References

FAA - General Requirements for Part 135 Certification

FAA - Part 135 Certification Process

14 CFR 135.21 - Manual Requirements

14 CFR 135.23 - Manual Contents

14 CFR 135.323 - Training Program Requirements


--- END ---

Privacy Policy
Copyright © 2001-2026 USAC Aviation. All rights reserved.